Lascal KIDDYBOARD-MAXI, Owner'S Manual

Page: 6 / 16

- 6 -
4.
5.
4. Tightening the connectors
The connector must be firmly attached to the
stroller. To further tighten the connector, only
use a coin as a lever. Do not tighten more
than the connector still can turn around the
axle/tubing.
English
3
2
1
1
2
6. Adjusting the length
Loosen the Fixing-arm screw (82206) and
pull the Fixing-housing out. There are four
alternative positions on the protruding arms.
Chose the position that allows your child to
comfortably stand on the platform and in the
same time is as little as possible in the way
for the person who is walking in behind.
3.
3. Position and attach the Connector
The Connector can be fitted, either onto the
stroller’s rear wheel axle or onto any horizon-
tal tubing between the stroller’s rear wheels.
The maximum circumference of the tubing/
axle is xx cm/ x in.
Bend the strap (82301) around the rear axle
or tubing. Then feed the strap through the
slot in the Connector cover (82300), Pull the
strap until tight. Secure the Connector by
turning the Connector-bolt (82302) clock-
wise.
THE CONNECTOR
3
2
1
5. Connecting
Attach the board to the connector by pushing
the connector-bolt into the hole in the Fixing-
housing (82220). Make sure that the Connec-
tor-bolt is locked in position.
6.