4
LASAL FLOAT CUSHIONS
www.lasal.dk
LASAL Flotation Cushions are available as follows:
Collarfloat; 4 sizes
Neck collar; 2 sizes
Banana-shaped Flotation Cushion; 3 sizes
U-Cushion; 1 size
T-shaped Flotation Cushion; 2 sizes
Bathing Flower; 2 sizes
Float Stabilizer; 2 sizes
Materials
Filling
: Flame retarded EPS beads (Expanded Polystyrene)
Outer cover - facing up
: 100% Polyester, not flame retarded.
Outer cover - facing down
: 100% Polyester mesh, not flame retarded.
Labelling
LASAL Flotation Cushions are labelled in accordance with applicable legislation cf. EC Directive 93/42EEC
1993. Each cushion is provided with a label containing information on the manufacturer, trademark,
warnings, item number, month & year of manufacturing, raw materials and symbols for cleaning and
maintenance.
For explanation of the symbols please see page 7 “Explanation of symbols”.
Cleaning and maintenance
After use it is essential that the outer cover is rinsed thoroughly in non-chlorinated water. When drying
the cushions must be placed with the blue mesh facing downwards in order to allow the water to drain
from the cushions. The cushions take quite a long time to drip dry and we therefore recommend use
exclusively in “wet” environments.
Flotation cushions should not be machine washed. The cushions can be hand washed with water and
plain soap and drip dried or cleaned/disinfected with alcohol. Please note that the pH of the used
disinfectant should not be higher than 11.4.
If using heating cabinet for drying the temperature must not exceed 70° C, as a higher temperature will
destroy the filling. Polystyrene beads melt at a temperature above 71° C. Polystyrene beads that come
into contact with the heating element of either a washing or drying machine can damage the machines.
Do not bleach or use fabric softener and other additives containing solvents.
