CHAPTER 1
INTRODUCTION
1-1
DT-203P, DT-105P and DT-110P display series
1
INTRODUCTION
The message displays of DT-105P, DT-110P and DT-203P series are industrial displays of
parallel control.
The displays working order is basically based on a microprocessor and on technically
advanced circuits of control.
Its main characteristic is the great size of the characters.
30mm. height for DT-203, which allows a reading up to 15 meters
50mm. height for DT-105, which allows a reading up to 25 meters.
100mm. height for DT-110, which allows a reading up to 50 meters.
They are manufactured in one or two sides of displaying, which provide several possibilities
and solutions when it has to be installed.
They can be set up on a surface, whether they are fixed to a wall or a partition, or they can be
left hanging from the lateral supports.
There is a wide range of applications of these displays, which goes from industrial
applications, such as warning breakdowns or displaying production information, to common
advertisements.