VPLHL-7WLED-GR30
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
2
of
2
LAMP REPLACEMENT
1.
Loosen (4) set screws holding Globe Guard.
2.
Remove Globe Guard assembly from handle.
3.
Unscrew Globe from handle.
4.
Replace with 10 watt LED compatible lamp.
5.
Screw Globe completely onto lamp base.
6.
Replace Globe Guard.
7.
Tighten (4) set screws securely.
Note:
Over tightening can deform threads.
USE AND CARE
Unauthorized modification may impair the function and/or safety of the work
light and could affect the life of the equipment. Always check damaged or worn
out parts before using the work light. When work light is not in use, store it in a
secure place out of the reach of children. Inspect for good working condition
prior to storage and before re-use.
REPLACEMENT PARTS
The VPLHL-7WLED-GR30 is designed to provide years of reliable lighting performance. Should the need for replacement
parts arise, please contact Larson Electronics at the contact information below.
Should further information not covered by these instructions be required, please contact Larson Electronics at
1-800-369-6671 or
for further assistance.
Please visit LarsonElectronics.com for
Warranty
and
Return
information.
