VPLHL-7WLED-50-NP
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
2
of
3
USING THE HAND LAMP
This versatile work light is equipped with 50 foot of 16/3 chemical and abrasion resistant
SOOW cord that is terminated in flying leads. This allows operators to wire this light in the work
area however they see fit or however is most convenient.
WARNING:
This hand lamp operates on selected voltage.
Check product label
for correct voltage! Damage from
improper voltage may not be covered by warranty.
OPERATION
The LED lamp in the hand lamp is “instant-on” and will illuminate once power is supplied.
LAMP REPLACEMENT
1.
Loosen (4) set screws holding Globe Guard.
2.
Remove Globe Guard assembly from handle.
3.
Unscrew Globe from handle.
4.
Replace with compatible 10 watt LED lamp.
5.
Screw Globe completely onto lamp base.
6.
Replace Globe Guard.
7.
Tighten (4) set screws securely.
Note: Over tightening can deform threads.
