121
13
System Configuration
Basic Configuration
1.
Click
System > Basic.
2.
Configure the parameters.
NOTE!
Only users with administrative credentials can set
Enable
Password
.
If
Enable Password
is not selected, no password is required
for local login at system startup. However, a username and
password are still required when you log in after a logout.
Some NVR models support Intelligent Mark. When the NVR
and IP camera are both enabled, the latest areas/lines or
VCA data configured for face detection, intrusion detection,
and cross line detection will be displayed on the
Preview,
Behavior
and
Alarm
windows in real time.
Intelligent mark is displayed on the screen as areas/lines in
different colors. Yellow means areas/lines configured for
face detection, intrusion detection, and cross line detection;
green means VCA data has changed but not triggered rules;
red means rules are triggered in the configured area (rules
are configured for VCA alarms), and VCA alarm has occurred.
You may also set startup Wizard here by clicking
Wizard
.
3.
Click
Apply
to save the settings.