0
MUL-30-LED
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
1
of
1
MOUNTING
The MUL-30-LED is equipped with a 3.25 inch diameter magnetic
base. The base is rated for 100 pounds which ensures a secure
grip for the light on any flat ferrous metal surface. The ability to be
securely mounted and easily moved to other locations without
any tools makes the MUL-30-LED a very versatile LED spotlight.
Lens Ring Screw
Tightening Bolt
HEAT MANAGEMENT
The MUL-30-LED is equipped with a 3.25 inch diameter magnetic
base. The base is rated for 100 pounds which ensures a secure
grip for the light on any flat ferrous metal surface. The ability to be
securely mounted and easily moved to other locations without
any tools makes the MUL-30-LED a very versatile LED spotlight.
THESE INSTRUCTIONS MAY NOT COVER ALL DETAILS OR VARIATIONS OF THIS PRODUCT FOR YOUR EQUIPMENT OR INSTALLATION REQUIREMENTS.
SHOULD FURTHER INFORMATION NOT COVERED BY THESE INSTRUCTIONS BE REQUIRED, PLEASE CONTACT LARSON ELECTRONICS BY EMAIL AT
OR BY PHONE AT 1-800-369-6671 FOR FURTHER ASSISTANCE.
PLEASE VISIT LARSONELECTRONICS.COM FOR
WARRANTY
AND
RETURN
INFORMATION.
LAMP MAINTENANCE
MAINTENANCE
There are no serviceable parts inside the fixture. However, it is good practice to routinely clean and check the
fixture for proper function.
•
Disconnect power running to the lamp and be sure the fixture is cool to the touch.
•
Use a non-abrasive glass cleaning solution to clean the lens.
Note: It is not necessary to open the fixture and clean or touch the LED’s.
USE AND CARE
Unauthorized modification may impair the function and/or safety of this device and could affect the life of the equipment.
Always check for damaged or worn out parts before using the device. Store it in a secure place out of the reach of
children when not in use. Inspect for good working condition prior to storage and before re-use.
REPLACEMENT PARTS
The
MUL-30-LED
is designed to provide years of reliable performance. Should the need for replacement parts arise,
please contact Larson Electronics.
