LEDXSL-10W-RGB
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
2
of
3
Warning:
Check product label for correct input voltage!
Attach supply line wires to the appropriate light fixture wires as shown
in the diagram
Secure each pair of wires according to the diagram. Utilize a junction box or
similar device and take precautionary steps for weatherproofing all
connections if installed in a location where water may come in contact with the
unit. Ensure the unit is properly grounded and that wiring is done according to
all local and national electrical/building codes.
Low Voltage DC
Connect power to power supply outputting low voltage between
6-50
Volts DC.
This variable voltage allows greater versatility without affecting light output. Ensure
deutsch connectors are properly connected (If applicable)
STROBE OPERATION
The LEDXSL-10W-RGB is a compact and superior LED beacon for outdoor use. This 10-watt strobe lamp operates on 6V
DC to 50V DC input (including commonly found 12V, 24V, 36V, and 48V). Equipped with color changing features (red,
green and blue), operators can change flashing patterns and light colors using a trigger wire. This trigger wire will be blue.
Maximum lumens for each color includes the following output levels: 140 (red), 340 (green) and 44 (blue). The unit is paired
with a specially designed clear optical lens to generate a brilliant 360 degrees of flashing light that is visible several
thousand feet away. The LED driver is secured on the board, inside the unit.
Users can easily find out and confirm the flashing mode needed by special indication.
Flash Patterns: 14
1. Quad Flash and Single Flash (T=710MS)
2. Quad Flash (T=710MS)
3. Double Flash (T=710MS)
4. Single Flash (T=710MS)
5. Double Flash and Single Flash (T=710MS
6. Five Consecutive Flash (T=710MS)
7. Single Flash 1 and Single Flash 2 (T=710MS)
8. Single Flash (T=1000MS)
9. Single Flash (T=400MS)
10. Single Flash (T=200MS
11. Single Flash (T=800MS)
12. Double Flash (T=400MS
13. Slow Single Flash and Quick Single Flash (T=279MS)
14. Slow Single Flash and Quick Single Flash (T=1180MS)
White: Trigger (touch with vin+)
Green: Sync Signal
Red: Vin +
Black: Vin -
STROBE PATTERNS
