LEDWP-250E-DLC-5000K
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
2
of
2
ASSEMBLY
Use the table below for assembling the hardware.
MAINTENANCE
There are no serviceable parts inside the fixture. However, it is good
practice to routinely clean and check the fixture for proper function.
•
Disconnect power running to the lamp and be sure the fixture
is cool to the touch.
•
Use a non-abrasive glass cleaning solution to clean the lens.
Note: It is not necessary to open the fixture and clean or touch the
LED’s.
TROUBLESHOOTING
Refer to the guide below or contact the manufacturer if the fixture does not function properly.
Is the correct line voltage being supplied to the fixture?
Is the fixture properly grounded?
Make sure installed power switches, photocells, etc. are functioning properly.
These instructions may not cover all details or variations of this product for your equipment or installation
requirements. Should further information not covered by these instructions be required, please contact Larson
Electronics at 1-800-369-6671 for further assistance.
CORD GRIP
MOUNT SCREW
Not
Applicable
