LEDP5W-12LT
Larson Electronics, LLC
Phone: (877) 348-9680
Fax: (903) 498-3364
www.larsonelectronics.com
2
of
2
RECHARGING
1.
Plug the unit into 115 VAC and note the lighted gauge indicator for battery status.
2.
The unit may be recharged by using an optional accessory power port cord with two male ends.
3.
Plug one end into the unit’s 12V outlet and the other end into the vehicle’s 12V power port socket. The vehicle
must be running to charge with this method.
BATTERY REPLACEMENT
This unit contains a sealed non-spill able lead acid battery. The battery must be recycled.
Contact Larson Electronics’ for replacing battery.
SAFETY AND USAGE INFORMATION
1.
Read these instructions completely before using the products and save them for future reference.
2.
Do not use unit to recharge dry cell batteries
3.
Do not jump-start or attempt to recharge a frozen battery.
4.
Charge unit in a well-ventilated area.
5.
All batteries are affected by temperature changes, and the unit’s small, lightweight battery is more sensitive to
storage temperature than a standard automotive battery. Temperatures above 68F degrees (20degrees C)
decrease amperage output. The ideal storage environment for emergency use is at room temperature.
STORAGE
Unit may be stored virtually anywhere, and in any position.
THESE INSTRUCTIONS MAY NOT COVER ALL DETAILS OR VARIATIONS OF THIS PRODUCT FOR YOUR EQUIPMENT OR INSTALLATION REQUIREMENTS.
SHOULD FURTHER INFORMATION NOT COVERED BY THESE INSTRUCTIONS BE REQUIRED, PLEASE CONTACT LARSON ELECTRONICS BY EMAIL AT
OR BY PHONE AT
1-877-348-9680
FOR FURTHER ASSISTANCE.
PLEASE VISIT LARSONELECTRONICS.COM FOR
WARRANTY
AND
RETURN
INFORMATION.
USE AND CARE
Unauthorized modification may impair the function and/or safety of this device and could affect the life of the equipment.
Always check for damaged or worn out parts before using the device. Store it in a secure place out of the reach of
children when not in use. Inspect for good working condition prior to storage and before re-use.
REPLACEMENT PARTS
The
LEDP5W-12LT
is designed to provide years of reliable performance. Should the need for replacement parts arise,
please contact Larson Electronics.
