Larson Electronics LLC www.LarsonElectronics.com [email protected]
9419 E US HWY 175, Kemp, TX 75143 - P: (800) 369-6671 - F: (903) 498-3364
LED10W-1X4LT
Read these instructions completely before using the product and save them for
future reference.
BATTERY SPECIFICATIONS
12 volt output
33 Amp hour AGM sealed lead acid
Built-in automatic charger rated for continuous duty
Voltage indicator gauge with push-to-test button
External charge cord receptacle, U.S. or foreign power cord supplied
Battery rated for 300+ full discharge cycles
3-5 year estimated service life
1 year warranty
SET-UP
Charge unit for 24 hours when new and every three months thereafter to maintain a full
charge (Charge monthly in hot weather)
Do not charge or use this light in hazardous locations
Extend retractable legs if necessary for uneven terrain
Extend aluminum pole to desired height and tighten each pole section into position
OPERATION
Single head light will operate over 40 hours on a full charge
Dual head light will operate over 20 hours on a full charge
The power port provided can be used to operate a cell phone, a laptop computer, or any
of Larson Electronics’ handheld lights with cigarette plug.
The power port can be used as a quick charge inlet for the light from an automobile’s
12-volt power port.
SAFETY AND USAGE INFORMATION
Do not use unit to recharge dry cell batteries
Do not jump-start or attempt to recharge a frozen battery.
Charge unit in well-ventilated areas.
All batteries are affected by temperature changes, and the unit’s small, lightweight
battery is more sensitive to storage temperature than a standard automotive battery.
Temperatures above 68°F (20°C) decrease amperage output. The ideal storage
environment for emergency use is at room temperature.
