IND-MD-DF-ESF-R1-SP0014
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
2
of
2
Replacement Angled Threaded Nozzle for IND-MD-DF-ESF-R1 Electrostatic Sprayer.
Installation
•
Disconnect unit from power and ensure all liquid has been completely emptied from the fixture.
•
Remove
any
current
threaded nozzles
and
wand tips from the unit.
•
Remove the old
angled threaded nozzle
from the current attachment
.
•
Replace the old
angled threaded nozzle
with the new replacement
angled threaded
nozzle on the desired
attachment
.
•
Connect the replacement
angled threaded nozzle
that is attached to the desired attachment
to the
wand.
•
Refill the fixture with liquid.
•
Follow proper operation instructions from the main manual for proper use of this unit.
USE AND CARE
Unauthorized modification may impair the function and/or safety of this device and could affect the life of the equipment.
Always check for damaged or worn out parts before using the device. Store it in a secure place out of the reach of
children when not in use. Inspect for good working condition prior to storage and before re-use.
REPLACEMENT PARTS
The
IND-MD-DF-ESF-R1-SP0014
is designed to provide years of reliable performance. Should the need for replacement
parts arise, please contact Larson Electronics.
THESE INSTRUCTIONS MAY NOT COVER ALL DETAILS OR VARIATIONS OF THIS PRODUCT FOR YOUR EQUIPMENT OR INSTALLATION REQUIREMENTS.
SHOULD FURTHER INFORMATION NOT COVERED BY THESE INSTRUCTIONS BE REQUIRED, PLEASE CONTACT LARSON ELECTRONICS BY EMAIL AT
OR BY PHONE AT 1-800-369-6671 FOR FURTHER ASSISTANCE.
PLEASE VISIT LARSONELECTRONICS.COM FOR
WARRANTY
AND
RETURN
INFORMATION.
