HUL-18-TRP
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
2
of
2
MAINTENANCE
Caution:
To avoid personal injury, disconnect power to the
unit
and allow the unit to cool down before
performing maintenance.
Warning:
Risk of electric shock.
1.
Perform visual, mechanical and electrical inspections on a regular basis. We recommend routine
checks to be made on a yearly basis. Frequency of use and environment should determine this. It is
recommended to follow an Electrical Preventive Maintenance Program as described in NFPA 70B:
Recommended practice for Electrical Equipment.
2.
The
unit
should be cleaned periodically as needed to ensure continued photometric performance.
Clean the
unit
with a damp, non-abrasive, lint-free cloth. If not sufficient, use mild soap or a liquid
cleaner.
3.
Inspect the cooling fins to ensure that they are free of any obstructions or
contamination (i.e.
excessive dust build-up). Clean with a non-abrasive cloth if needed.
4.
Do not operate if the
unit
is cracked or damaged. All fasteners should be properly seated.
USE AND CARE
Unauthorized modification may impair the function and/or safety of this device and could affect the life of the equipment.
Always check for damaged or worn out parts before using the device. Store it in a secure place out of the reach of
children when not in use. Inspect for good working condition prior to storage and before re-use.
REPLACEMENT PARTS
The
HUL-18-TRP
is designed to provide years of reliable performance. Should the need for replacement parts arise,
please contact Larson Electronics.
THESE INSTRUCTIONS MAY NOT COVER ALL DETAILS OR VARIATIONS OF THIS PRODUCT FOR YOUR EQUIPMENT OR INSTALLATION REQUIREMENTS.
SHOULD FURTHER INFORMATION NOT COVERED BY THESE INSTRUCTIONS BE REQUIRED, PLEASE CONTACT LARSON ELECTRONICS BY EMAIL AT
OR BY PHONE AT 1-800-369-6671 FOR FURTHER ASSISTANCE.
PLEASE VISIT LARSONELECTRONICS.COM FOR
WARRANTY
AND
RETURN
INFORMATION.
PLUG
Each HUL-18-TRP Spotlight comes with a detachable 16 foot coil cord with trailer hitch plug. Plug options include: 4-pin flat
connector, 4-pin round connector, 6-pin round connector, 7-pin round connector, and 7-pin flat connector. (Please note: the
exterior housing on both 7-pin flat and 7-pin round connectors are physically round, the pins are either flat or round). The
cord is detached via a weatherproof, 2 pin Deutsch connector which easily and securely attaches and detaches the coil cord
from the spotlight. Other cords, including 21 foot cords with ring terminals (C-21RT), 16 foot cord with spring battery clamps
(alligator clips) (C-16BC) and a 16 foot straight cord with cigarette plug (C-16CP) are available. This light can be ordered in
either 12 volt or 24 volt configuration, allowing it to be used with any vehicle or ATV equipped with a cigarette plug.
VOLTAGE
Most vehicles are 12 Volt DC. 24 Volts DOES NOT mean more power. Running a 24V light from a 12V power source will
result in a very dim or non-functioning light, and may cause internal damage to the light as well. For common vehicle use,
please order 12V.
DETACHABLE CORDS
•
Cord is attached via a weatherproof 2-pin Deutsch connector.
•
The cord is detachable by depressing the tab on the top of the connectors. This enables the
operator to remove and store the light while leaving the cord connected to the power source.
•
Additional or replacement cords can be ordered from our website. Contact us or visit LarsonElectronics.com for more
information.