![background image](http://html1.mh-extra.com/html/larson-electronics/halprm-ps-1000wmh/halprm-ps-1000wmh_instruction-manual_4574806002.webp)
HALPRM-PS-1000WMH
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
2
of
2
IF SINGLE VOLTAGE
All single voltage ballasts are pre-wired such that user need only connect the supply connectors.
MULTIVOLT (120/
208
/
240
/
277
V)
Connect the ballast lead with the insulated terminal to the desired voltage terminal as indicated on the ballast terminal
nameplate.
WIRING OUTDOOR SALT WATER MARINE
Wiring is accomplished through the wiring box on the bottom of the fixture. When wiring is complete, tighten weatherproof
fitting on box around cable.
MAINTENANCE
CAUTION:
Risk of Burn. Disconnect power to the light and allow the unit to cool down before performing maintenance.
The ALGLAS finish on the reflector and the door glass may be cleaned with any suitable nonabrasive glass cleaning
solution, soap, or detergent and rinsed with clean water.
Perform visual, mechanical and electrical inspections on a regular basis. We recommend routine checks to be made on a
yearly basis. Frequency of use and environment should determine this. It is recommended to follow an Electrical
Preventive Maintenance Program as described in NFPA 70B: Recommended practice for Electrical Equipment.
THESE INSTRUCTIONS MAY NOT COVER ALL DETAILS OR VARIATIONS OF THIS PRODUCT FOR YOUR EQUIPMENT OR INSTALLATION REQUIREMENTS.
SHOULD FURTHER INFORMATION NOT COVERED BY THESE INSTRUCTIONS BE REQUIRED, PLEASE CONTACT LARSON ELECTRONICS BY EMAIL AT
OR BY PHONE AT 1-800-369-6671 FOR FURTHER ASSISTANCE.
PLEASE VISIT LARSONELECTRONICS.COM FOR
WARRANTY
AND
RETURN
INFORMATION.
USE AND CARE
Unauthorized modification may impair the function and/or safety of this device and could affect the life of the equipment.
Always check for damaged or worn out parts before using the device. Store it in a secure place out of the reach of
children when not in use. Inspect for good working condition prior to storage and before re-use.
REPLACEMENT PARTS
The EPP-20A-25P is designed to provide years of reliable performance. Should the need for replacement parts arise,
please contact Larson Electronics.