HALD-24-1X150LED-V3-DIMM
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
3
of
4
Use only 0-10V Dimmer appropriate for the location installed.
WARNING:
Mis-wiring Low Voltage Dimming Control could cause permanent damage to light.
DO NOT
connect dimming control to line voltage.
DO NOT
connect dimmer with power applied.
WIRE(AC)
WIRE(DC)
COLORED CABLE
AC LIVE
DC LIVE
BLACK
AC NEUTRAL DC NEUTRAL
WHITE
GROUND
GROUND
GREEN
D D
RED
DIMMING -
DIMMING -
ORANGE
WARNING:
CHECK NAMEPLATE FOR PROPER VOLTAGE.
DAMAGE FROM IMPROPER VOLTAGE WILL VOID WARRANTY.
DIMMING
This LED light fixture features 0-10V dimming capabilities via an external driver. This gives operators the ability
to manually adjust the brightness of the LED lamp quickly and easily. The 0-10V dimming allows for
adjustments to fit the brightness needs of any lighting situation. A 0-10V dimmable light works through the use
of a DC control signal that ranges between zero and ten volts. The basic idea is that at 10 volts of input the
light is at its brightest level with 0 volts being the lowest possible dimness setting. The smooth, continuous and
flicker-free dimming of a 0-10V dimmable LED light is ideal for a wide range of different lighting applications.
Voltage:
Check product label for correct voltage.
WIRING
(see attached wiring diagram)
This unit comes preconfigured in selected voltage and beam configuration. Wire light to the correct
voltage. Follow all applicable local, state, and National Electrical Code for the hazardous area.
Wire size is 18/5.
