Larson Electronics HAL-RSLED-240W Quick Start Manual Download Page 3

Page: 3 / 3

Larson Electronics LLC www.LarsonElectronics.com [email protected]

9419 E US HWY 175, Kemp, TX 75143 - P: (800) 369-6671 - F: (903) 498-3364

Open the HAL-RSLED-240W Box lid.

Connect desired 3/4” NPT entry and run wire as per applicable standards for area of use. For
connections use wire rated to a minimum of 95°C.

Connect AC in feed to labeled wires in box as per applicable standards for area of use.

10.

Close Box lid. Torque lids screws according to diagram.

11.

Energize fixture.

Summary of Contents for HAL-RSLED-240W

Page 1: ...OFF before and during installation and maintenance Luminaire must be connected to a wiring system with an equipment grounding conductor Potential Electrostatic Charging Hazard Avoid electrostatic dis...

Page 2: ...P 800 369 6671 F 903 498 3364 4 Slide assembled fixture onto Surface Wall Bracket 5 Align and mount lower four 4 M6 hardware first then proceed with side four 4 M6 bolts 6 If requires connect safety...

Page 3: ...Open the HAL RSLED 240W Box lid 8 Connect desired 3 4 NPT entry and run wire as per applicable standards for area of use For connections use wire rated to a minimum of 95 C 9 Connect AC in feed to la...