HAL-MB-185LED-CPR-100
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
2
of
2
WIRING
(see attached wiring diagram)
This unit comes preconfigured with selected cord cap. The is outfitted with 100` of 16/3 chemical and
abrasion resistant SOOW cord that is fitted with an explosion proof cord cap for easy connection to
explosion proof outlets. Plug options include a 5-15 15 amp straight blade plug for use with 120V
explosion proof outlets, a 5-20 20 amp straight blade plug for use with 120V explosion proof outlets,
or a 6-20 20 amp straight blade plug for use with 220-240V explosion proof outlets. **PLEASE
NOTE** voltage ratings on plugs and outlets are MAXIMUM voltage. For low voltage applications,
proper voltage must be applied to the outlet or damage to the light fixture will occur.
MAINTENANCE
Caution:
To avoid personal injury, disconnect power to the light and allow the unit to cool down before
performing maintenance.
Warning:
No user serviceable parts inside of fixture. Risk of electric shock. Removal of the lens will
void the warranty.
1.
Perform visual, mechanical and electrical inspections on a regular basis. We recommend
routine
checks to be made on a yearly basis. Frequency of use and environment should
determine this. It
is recommended to follow an Electrical Preventive Maintenance Program
as described in NFPA
70B: Recommended practice for Electrical Equipment.
2.
The lens should be cleaned periodically as needed to ensure continued photometric
performance.
Clean the lens with a damp, non-abrasive, lint-free cloth. If not sufficient, use
mild soap or a liquid
cleaner.
3.
Inspect the cooking fins on the luminaire to ensure that they are free of any obstructions
or
contamination (i.e. excessive dust build-up). Clean with a non-abrasive cloth if
needed.
4.
Do not operate if the lens is cracked or damaged. All fasteners should be properly seated.
THESE INSTRUCTIONS MAY NOT COVER ALL DETAILS OR VARIATIONS OF THIS PRODUCT FOR YOUR EQUIPMENT OR INSTALLATION REQUIREMENTS. SHOULD FURTHER
INFORMATION NOT COVERED BY THESE INSTRUCTIONS BE REQUIRED, PLEASE CONTACT LARSON ELECTRONICS BY EMAIL AT
OR BY PHONE AT
1-800-369-6671 FOR FURTHER ASSISTANCE.
PLEASE VISIT LARSONELECTRONICS.COM FOR
WARRANTY
AND
RETURN
INFORMATION.
