WARNING:
Unused wires must be capped using enclosed wire nuts.
OPERATION
1.
1. During an electrical power failure, the lamps on the unit will automatically come ON for a minimum of 90 minutes.
2. To test this unit, let it charge correctly with AC power supply for a minimum of 24 hours after its first installation and then
depress the "TEST' switch, the emergency lamps will illuminate. When the switch is released, the lamps will tum OFF.
LED WIRING DIAGRAM
277VOLT
RED
120VOL T BLACK
NEUTRAL _W_H_IT_E_--t
NOTE:UNUSED LEAD TO BE PROPERLY i----'
INSULATED WITH WIRE NUT
OR OTHER APPROVED METHOD
RED
BLACK
RED
BLACK
LED LAMP .LED LAMP
MR16 WIRING DIAGRAM
277VOLT
RED
120VOL T BLACK
NEUTRAL _W_H_IT_E_--t
NOTE: UNUSED LEAD TO BE PROPERLY i---
lNSULATED WITH WIRE NUT
OR OTHER APPROVED METHOD
RED
BLACK
RED
BLACK
MR16 6V5W MR16 6V5W
PCB
READY TEST
PCB
READY TEST
RED
BLACK
-
+
BATTERY
3. 6V /900mAH
RED
BLUE
-
+
BATTERY
&V/4. 5A
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
2
of
2
GAU-EMG-2X5W-LED-WP
