Larson Electronics LLC www.LarsonElectronics.com [email protected]
9419 E US HWY 175, Kemp, TX 75143 - P: (800) 369-6671 - F: (903) 498-3364
The battery and charger are calibrated to sense charge rate and charge capacity. Under normal
circumstances the system works reliably. Excessive temperature, power surges, or shock can cause the
circuits to sense an unstable condition that will cause the internal fuse to blow.
BATTERIES
Batteries can be charged and discharged hundreds of times. When a noticeable drop in battery
performance occurs, it is time to replace the battery module. We recommend changing the battery once
a year depending on usage. Shorter durations may be necessary with extensive use of the light.
While charger is not in use, disconnect the power supply. Do not leave the battery on the charger past
full charge indication as the charger could sense an overcharge condition if a power surge occurs.
Overcharge can shorten the lifespan of the battery. Before charging, make sure the power switch is
“OFF”.
Only use the charger and battery that was shipped with the light. Do not use other types of batteries or
chargers. To do so will damage the light and void your warranty. Your dealer has spare batteries and
chargers available.
