6
Initial Configuration
After you log in to the device, please perform the following initial configuration.
1
Reconfigure the device IP and network parameters
based on the actual networking.
2
Log out and log in again to the Web using the
new IP address.
-
3
Set the system time based on the actual situation.
4
(Optional) Set the management server
Set the management server based on the actual
networking.
5
(Optional) Set the server for storing photos.
Set the server for storing photos based on the actual
networking.
6
Set OSD
.
Set the information displayed on the screen as needed,
for example, time.
7
Change the default password and add common users as
needed.
You can watch the live video after finishing the initial configuration. Please configure other parameters
as needed.