background image

EXPCMR-ALG-1080P-IC-M-16.7-25-L21.20-1227

Larson Electronics, LLC

 

 Phone: (800) 369-6671 

Fax: (903) 498-3364 

www.larsonelectronics.com 

7

 of 

7

MAINTENANCE 

There are no serviceable parts inside the fixture. However, it is good practice to routinely clean and check the 

fixture for proper function. 

Disconnect power running to the 

camera

 and be sure the fixture is cool to the touch.

Use a non-abrasive glass cleaning solution to clean the lens.

USE AND CARE

Unauthorized modification may impair the function and/or safety of this device and could affect the life of the equipment. 

Always check for damaged or worn out parts before using the device. Store it in a secure place out of the reach of 

children when not in use. Inspect for good working condition prior to storage and before re-use.

 

 

REPLACEMENT PARTS

The 

EXPCMR-ALG-1080P-IC-M-16.7-25-L21.20-1227

 is designed to provide years of reliable performance. Should the 

need for replacement parts arise, please contact Larson Electronics. 

THESE INSTRUCTIONS MAY  NOT COVER ALL DETAILS OR VARIATIONS OF THIS PRODUCT FOR YOUR EQUIPMENT OR INSTALLATION REQUIREMENTS. 

SHOULD FURTHER INFORMATION NOT COVERED BY THESE INSTRUCTIONS BE REQUIRED, PLEASE CONTACT LARSON ELECTRONICS BY EMAIL AT 

[email protected]

 OR BY PHONE AT 1-800-369-6671 FOR FURTHER ASSISTANCE. 

PLEASE VISIT LARSONELECTRONICS.COM FOR 

WARRANTY

 AND 

RETURN

 INFORMATION.

Summary of Contents for EXPCMR-ALG-1080P-IC-M-16.7-25-L21.20-1227








Reviews: