EPL-RPS-70A
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
2 of 2
1.
Lift receptacle door and locate polarization on mating plug pin and receptacle face. Insert plug straight all the way into receptacle
until it cannot go further.
2.
Rotate plug clockwise limit (37º), this closes internal contacts and completes circuit. This also mechanically locks plug into
receptacle so it cannot be pulled out.
3.
To remove plug, push plug inward and turn to counterclockwise, pull plug straight out.
Mounting holes on the sides are convenient for hooking drop lights. (sold separately)
MAINTENANCE
WARNING:
Only qualified personnel should inspect, or maintain transformers and power distribution since the normal operating voltages can be
hazardous.
WARNING:
Hazard of electrical shock, explosion or arc flash. Turn off power supplying this equipment before working on it. Discharge all static
charges held by coils. Failure to follow these instructions may result in death or serious injury.
Transformers contain no moving parts and require very little maintenance. Periodic inspection and care are recommended practices
especially if the transformer is operating in a harsh environment.
Inspect for loose connections, condition of terminal board, condition of splices, overheating, rust, paint deterioration and general
condition of the unit. Corrective measures should be taken if necessary. Removal of dust, dirt and debris from the external enclosure
surfaces is encouraged and may be performed while the transformer is in operation.
If maintenance includes removal of enclosure panels, the transformer must be de-energized. The use of lockout/tag-out practices is
required.
Internal maintenance would include:
Inspection and tightening of bolted connections.
WARNING:
Although transformers are static devices, it is necessary to use forethought coupled with care in installation. This will result in
satisfactory performance over a long period of time. The minimum requirements for installation and maintenance and limitations of
operation have been set forth in this manual. Following these procedures will result in satisfactory performance, whereas disregarding
them can void the warranty.
Save this instruction sheet for future use of the product.
THESE INSTRUCTIONS MAY NOT COVER ALL DETAILS OR VARIATIONS OF THIS PRODUCT FOR YOUR EQUIPMENT OR INSTALLATION REQUIREMENTS.
SHOULD FURTHER INFORMATION NOT COVERED BY THESE INSTRUCTIONS BE REQUIRED, PLEASE CONTACT LARSON ELECTRONICS BY EMAIL AT
OR BY PHONE AT 1-800-369-6671 FOR FURTHER ASSISTANCE.
PLEASE VISIT LARSONELECTRONICS.COM FOR
WARRANTY
AND
RETURN
INFORMATION.
