EPL-FL1524-LED Series
Larson Electronics, LLC
Phone: (877) 348-9680
Fax: (903) 498-3364
www.larsonelectronics.com
2
of
2
POWER
The EPL-FL1524-LED series handlamp is available in a variety of cord options and voltages.
Be sure to check the
product label for correct input voltage and/or compatible cord cap and receptacle.
We strongly encourage a licensed electrician install this product
, in all locations especially in outdoor areas
where weatherproofing may be required.
Warning:
Check product label for correct input voltage!
FOR FLYING LEADS:
Attach supply line wires to the appropriate light fixture wires as shown
in the diagram
Secure each pair of wires according to the
applicable
diagram. Utilize a
junction box or similar device and take precautionary steps for
weatherproofing all connections if installed in a location where water may
come in contact with the unit. Ensure the unit is properly grounded and that
wiring is done according to all local and national electrical/building codes.
Standard Cord Cap
This unit
may also
come pre-wired from factory with the selected cord
cap.
Mate the cord cap with a compatible receptacle outputting the correct
voltage.
Take precautionary steps for weatherproofing all connections if
installed in a location where water may come in contact with the unit.
All outdoor installations and indoor installations near a wet location require
the use of a GFCI device for safety, according to the National Electrical
Code® (NEC). Ensure the unit is properly grounded.
MAINTENANCE
There are no serviceable parts inside the fixture. However, it is good practice to routinely clean and check the
fixture for proper function.
•
Disconnect power running to the lamp and be sure the fixture is cool to the touch.
•
Use a non-abrasive glass cleaning solution to clean the lens.
Note: It is not necessary to open the fixture and clean or touch the LED’s.
USE AND CARE
Unauthorized modification may impair the function and/or safety of this device and could affect the life of the equipment.
Always check for damaged or worn out parts before using the device. Store it in a secure place out of the reach of
children when not in use. Inspect for good working condition prior to storage and before re-use.
REPLACEMENT PARTS
The
EPL-FL1524-LED
is designed to provide years of reliable performance. Should the need for replacement parts arise,
please contact Larson Electronics.
THESE INSTRUCTIONS MAY NOT COVER ALL DETAILS OR VARIATIONS OF THIS PRODUCT FOR YOUR EQUIPMENT OR INSTALLATION REQUIREMENTS.
SHOULD FURTHER INFORMATION NOT COVERED BY THESE INSTRUCTIONS BE REQUIRED, PLEASE CONTACT LARSON ELECTRONICS BY EMAIL AT
OR BY PHONE AT
1-877-348-9680
FOR FURTHER ASSISTANCE.
PLEASE VISIT LARSONELECTRONICS.COM FOR
WARRANTY
AND
RETURN
INFORMATION.
