I. Installation & Maintenance
1
I. Re-lamping
1. Remove the 4 screws located at the bottom
of the lamp.
2. Pull cap gently and evenly away from the
fixture.
3. Remove LED tube and replace (must use
our LEDT8-F15 bulb).
4. Slide assembly back into handle and fasten
securely with the 4 screws.
II. Maintenance
Make sure that power is OFF before servicing
or replacing any parts. Maintenance should be
performed in non-hazardous areas.
To maintain peak efficiency, clean the exterior
daily.
Check cable for severe abrasion, cuts or
breaks and replace if necessary.
Remove to re-lamp
