![background image](http://html.mh-extra.com/html/larson-electronics/epl-fl-26/epl-fl-26_quick-manual_677039003.webp)
Larson Electronics LLC
www.
larsonelectronics
.com
9419 E US HWY 175, Kemp, TX 75143 - P: (800) 369-6671 - F: (903) 498-3364 - E:
sales@
larsonelectronics
.com
4. Remove the shock from the end of the lamp and set aside. Grasping lamp holder in one hand
and lamp in other hand, remove the lamp with a slow rocking motion and discard.
5. Replace lamp with a Sylvania Dul D/E 26W CF26DD/E/841 or Dulux D CF26DD/841 lamp or
equivalent. Slide shock on the end of the lamp. Slide lamp into lamp holder assembly until a click
is heard.
6. Make a visual inspection of the “O” Ring.
7. Slide the lamp assembly back into handle and cage assembly, aligning the four screw holds.
Tighten brass screws and torque to 35lbf-ft (47.5N-m). Slide handle cap doughnut onto handle
cap, align holes with screws. Slide strain-relief into place and tighten to a snug fit.
8. Test light in a non-hazardous location before using in a hazardous location to ensure proper
operation of lamp.