Larson Davis System 824, Technical Reference Manual

Page: 107 / 673

9/29/09 Quick Start 4-11
Recalling Stored Data
Measurement data that has been stored can be recalled for
review at any time. To recall a data file, do the following:
Step 1 Press the
D
Data key and a screen similar to the
following appears:
When recalling a data file, the
System 824 will automatically switch
to the instrument that the data file
was stored as (i.e. from Logging to
SLM&RTA). Step 2 Use the
u
up and
d
down arrow keys to
highlight “Recall Files” and press the
c
check
key. The following appears:
The Data Files screen shows the
currently selected record number, the
ID used to take the measurement, the
start/stop dates and times, and the
total bytes used by the record.
A summary of each data file can be viewed to determine if it
is the desired measurement. To view each data file summary
use the
u
up and
d
down arrow keys.
Step 3 You can recall the selected Data File by pressing
the
c
Check key. The following screen appears: