Larson Davis SoundTrack LxT, User Manual

Page: 89 / 307

6-8
Storing Measurements LxT Manual
After a file has been successfully
stored, the LxT automatically resets
when the
9
key is pressed to begin
another measurement.
The data is stored under the file name defined in the section
"General Tab" along with a file number. The file number
automatically begins at 000 for the first measurement stored.
The file number is also indexed so that whenever a
measurement is stored, the file number assigned is the next
in sequence following the measurement previously stored.
Overwriting a Saved File
If you wish to use this data to replace a data file already
saved in the LxT, select the box with the title “
... ” and press
5
(ENTER). This opens a window listing all the data files
already saved in the LxT, as shown in FIGURE 6-7.
FIGURE 6-7 Saved Data Files
Select the file that is to be overwritten. This replaces the file
name and number that previously appeared with the one
shown on the display, as shown in FIGURE 6-8.
FIGURE 6-8 Overwriting a Saved File