SoundAdvisor Model 831C
Setting Up the Meter’s Network ID
13-2
Step 2
Connect the assembly as shown in
FIGURE 13-1
831C Connected to Ethernet Port
13.2 Setting Up the Meter’s Network ID
Access and configure your meter’s networking properties—the network
password, IP address, and MAC address as shown in the following sections.
13.2.1 Setting a Static IP Address
Your meter communicates more efficiently with other devices when you set a
static IP address instead of using a dynamically- assigned IP address.
Step 1
On your meter, go to
Tools
3
System Properties
to
Network
tab, as
shown in
.
Step 2
Select
Set Static IP.
Insert the Ethernet adapter
(DVX012) into the auxiliary port
on the bottom of the 831C.
Connect the Ethernet
cable to the Ethernet
adapter (DVX012)
adapter.
Plug in to an Ethernet port
in a wall jack or in another
supported device.
NOTE
:
Ethernet connections
consume a high amount of
power. We recommended
that you also connect the
meter to an external power
source (or by USB) while
connected.
