Larson Davis HVM200, Reference Manual

Page: 69 / 77

HVM200 Reference Manual B-2
B.1.3 Installing the ADP082A
FIGURE B-3
(Clamp Adapter with SEN04XF Accelerometer)
B.1.4 Measurements
Frequency Response
The frequency response measurements were
performed by suspending the test object and
exciting it with a modal hammer. The responses
were measured in x, y and z directions using a
triaxial accelerometer connected to the test object
using the specified adapter. A graphic is included
to illustrate the test configuration.
Triaxial Accelerometer
The triaxial accelerometer used for these tests was
a Larson Davis Model SEN041F having a sensitivity
of 10 mV/g.
B.1.5 A SEN041
FIGURE B-4 A SEN041