Larson Davis 831C-FFT, Reference Manual

Page: 83 / 254

SoundAdvisor Model 831C Saving, Moving, or Copying Data Files 78
Step 6.
Repeat steps 4–5 until all data files you want to average have been added.
Step 7.
Press
Close
(
/*/
) to close the File manager, then navigate to the
Overall
display to view the average data.
Step 8.
To save the averaged data file, press
Stop/Store
7
.
8.3 Saving, Moving, or Copying Data Files
In this section:
• 8.3.1 About File Naming Conventions
• 8.3.2 Moving or Copying Data Files to a USB Drive
8.3.1 About File Naming Conventions
In addition to manually naming a data file, there are 2 conventions the 831C uses to
automatically generate unique file names. These are a product of the run mode indicated
in a setup. Table 8.2 contains details and examples.
Table 8.2 Data File Naming Conventions
Run Mode
File Naming
Convention
Example Additional Information
Manual Stop “Default Data
File”.NNN
831_Data.001 The “Default Data File” can be
changed on the General setup page.
NNN represents single digits that
increment sequentially from 001–
999, then reset to 001 to create a
unique filename.
Continuous-
Up to 48 daily auto-
stores per day
(choose a period:
range from every 24
hr–30 mins)
YYMMDDXX.LDO 18031401.LD0 The filename is 12 characters and
includes the year, month, and day
followed by 2 digits. The values of XX
increment from 00 –99 to create a
unique filename.
Continuous- Stores
Every 15 mins or 10
mins
YYMMDDXX.LD0 1610110A.LD0 The filename includes the year,
month, and day followed by a
hexadecimal number that
increments from 00–FF to create a
unique filename.
Continuous- Stores
every 5 mins, 3 mins,
or 2 mins
YYMMDDXXX.LD0 181205AA6.LD
0
Filename is 13 characters: the year,
month, and day followed by 3
alphanumeric values that increment
from 000–FFF to create a unique
filename.