SoundAdvisor Model 831C
Creating a Custom Setup File On the Meter
55
6.2 Creating a Custom Setup File On the Meter
While measurement settings can be indicated directly in the
Active
setup, it’s a good
practice to save a custom setup file for each specific measurement. Complete all sections
to accomplish this.
In this section:
•
6.2.1 Creating a New Setup File On the Meter
•
6.2.2 Customizing Setup Values On the Setup Manager Tabs
•
•
6.2.1 Creating a New Setup File On the Meter
Step 1.
On the 831C, go to
Tools
3
Setup Manager
.
Step 2.
In the Setup Manager File list, highlight the
Default
setup in the list and press
Enter
5
. This opens the Setup Manager pop-up menu.
Step 3.
Select
Save As
. This opens the virtual keypad.
FIGURE 6-2
831C Virtual Keypad
Step 4.
Enter a name for your Setup using the navigation
buttons and select
OK
. Your setup file appears in the
Setup Manager list.
6.2.2 Customizing Setup Values On the Setup Manager Tabs
Some tabs (pages) in this section become available when you purchase and install
optional firmware from Larson Davis. If a step indicates a feature that isn’t available on
your meter, move on to the next step.
Before you begin:
•
Create a new Setup file on the meter.
Summary of Contents for 831C-FFT
