LT-4100 User & Installation Manual Rev 1.00
System Services
Lars Thrane A/S
www.thrane.eu
Page 59 of 129
Bluetooth
The LT-4100 system offers the user the ability to wirelessly connect equipment to the system using the
Bluetooth interface. The Bluetooth feature enables the operator of the system to use the LT-4100 system
data connection on their Bluetooth connected equipment. The system currently offers the ability to
connect 8 devices simultaneously. The user should consider that connecting 8 devices and accessing data
features on all 8 will result in slower data speeds as this divides the LT-4100 download between many
devices. Because of this it is advised that the user only connects the needed number of devices.
Note the Bluetooth feature governs to the set rules for the Outgoing Firewall regarding data transmission.
For more information see
Outgoing Firewall
under
on page 55.
PAN profile
The Bluetooth connectivity uses a wireless personal area network (WPAN) for connection. This provides
data transmission from the LT-4110 Control Unit to Bluetooth connected devices. The connectivity is set up
using the PAN profile which makes the Bluetooth network emulate an ethernet connection to connected
devices. Applications running on connected devices will see the connection as through ethernet due to this
simulation. The PAN profile is currently the only supported Bluetooth profile for the LT-4100 system.
Therefore, the Bluetooth functionality is limited to offering a data transmission between the connected
device and the LT-4100 system.
How to pair
Pairing devices to the LT-4100 using Bluetooth is a straightforward operation. The user must enable
Bluetooth on both the LT-4110 Control Unit and the device to pair. Bluetooth is enabled on the LT-4110
Control Unit in the Bluetooth submenu under the Settings menu, this is described in
on page 65. Figure 55 below shows the Bluetooth submenu with Bluetooth enabled, the system is
now ready to pair.
NOTE:
For the LT-4100 to be able to pair to a Bluetooth device, the LT-4110 Control Unit must be
in the Bluetooth submenu.
The LT-4100 is chosen from the Bluetooth list on the device which shall be connected. From there a pairing
code will be displayed on the LT-4110 Control Unit screen, see Figure 56.
Figure 55: Bluetooth (How to pair) 1/5
System:
MENU -> Settings-
>Bluetooth
Summary of Contents for LT-4100
Page 2: ......
Page 141: ...Lars Thrane A S Skovlytoften 33 2840 Holte Denmark www thrane eu...
