LT-3100 User & Installation Manual Rev. 1.06
Web server
Lars Thrane A/S
www.thrane.eu
Page 101 of 155
Accessing the built-in web server
To access the built-in web server of the LT-3100 system, please complete the following steps:
1.
Connect the LT-3110 Control Unit directly to a PC using an Ethernet cable or connect the LT-3110
Control Unit to a Local Area Network (LAN), where a PC is connected.
2.
Identify the IP address that is assigned to the LT-3110 Control Unit. The IP address can be read out
from the display (MENU -> System -
> Network: IP Address). The IP address is valid if the ‘Link
Status’ is showing ‘Up’. The IP address is assigned dynamically by a
DHCP server.
3.
From the PC, start a browser (e.g. Microsoft Edge, Explorer, Chrome, etc.) and type in the IP
address, which was identified in the LT-3110 Control Unit (e.g. 10.1.10.39).
4.
The browser might show you a warning about an invalid web server certificate, as illustrated in
Figure 138. Make sure, that you have typed in the correct IP address.
5.
Press ‘Details’ and you will be presented for an extended p
age view (including a link), which will
direct you to the LT-3100 s
ystem dashboard ‘Go on to the webpage (Not recommended)’.
6.
You will now see the LT-3100 system dashboard.
Figure 138: Accessing the built-in web server (
“
This site is not secure
”
).
Summary of Contents for LT-3100
Page 2: ......
Page 167: ...Lars Thrane A S Skovlytoften 33 2840 Holte Denmark www thrane eu...
