LT-4200 User & Installation Manual Rev. 1.00
Web server
Lars Thrane A/S
www.thrane.eu
Page 95 of 128
Telephony
The LT-4200 System has a built-in PBX trunk (SIP), which supports internal and external satellite calling. The
LT-4200 system supports 3 x Iridium satellite voice channel. The PBX trunk (SIP) can be accessed via
Ethernet or RJ45. Up to 8 external SIP devices can be registered in the PBX trunk. All the enabled voice
channels can be configured for either or both Voice Line 1, 2 and 3. The web server, configuration -
Telephony is illustrated in Figure 111.
On Figure 111 it is possible to see the three voice lines, their type (post-paid) and the respective phone
numbers for line 1, 2 and 3.
In the LT-4210 Control Unit, UI display (MENU -> System ->
SIP Phones) it is possible to get an actual status
of the number of SIP devices and their registration status. This is further illustrated and described in
on page
The following external applications requires a SIP configuration:
•
Connection of ships PBX
•
External SIP Phones
•
External Analogue Phone Adapter
•
SIP Softphones via external Wi-Fi Access Point (WAP)
Incoming calls to any of the three possible configurable Lines will be signaled to all phones configured for
the specific line. If an incoming call is directed to Line 1, all Line 1 phones will ring, whereas Line 2 and Line
3 phones will not. The LT-4200 system supports call forwarding, such that Line 1 may be set up to forward
to Line 2 and vice versa. It is possible to set up e.g., the CU to both Line 1, Line 2 and Line 3.
Figure 111: Web server - Telephony
Summary of Contents for Iridium Certus 200
Page 2: ......
Page 140: ......
Page 141: ...Lars Thrane A S Skovlytoften 33 2840 Holte Denmark www thrane eu...
