Installation manual
7
11346
1. Choose place for the post [1] remembering about safety area.
2. Using a pattern, mark tracks of foundation bars [2], pattern protect by nuts M22 [9].
3. Using flat bars [3] mark places for the foundations [5].
Mark places for middle foundations [6], that are in the middle of length - measuring in straight line -
between the foundations [5]. Use a flat bar [4] to mark foundations [6].
Foundation bars [2] have to go into flat bars holes. This will guarantee right postions of the foundations..
4. Dig holes for foundation bars [2] and foundations [5] & [6].
Before concrete foundations protect them against movement and using flat bars make sure they are in right place
WARNING! Main post foundation [1] can’t be lower than foundations [5] & [6].
5. Place the concrete in foundations [1], [5], [6] and wait untill solidified.
6. Install post [1] (description on the next page) and regulate tension of the opposite ropes with a turnbuckle
(as tight as possible, keeping vertical position of the post) use nut [7] and then regulate by tension element
on the top of post, description on the page number 6
(use tension element as less as possible to keep possibilty to regulate in future tension of the ropes).
7. After tension the ropes cut the bolt in anchors to nut height.
[2]
[5]
[3]
[4]
[5]
[3]
[4]
[6]
[5]
[1]
[5]
[5]
[6]
[2]
INSTALLATION ON GROUND
[7]
[9]
