background image

2

®

TABLE OF CONTENTS

Warnings 

Preliminary steps, Important notes & Pump power info

Parts list

Setup instructions, Use of pump 

Motor care, Pump maintenance

Filter cartridge use & care

Pool water care 

Pump disassembly & storage

Pump servicing instructions

Troubleshooting guide

Replacement parts ordering info

3 ~6

7

7 ~ 8

9 ~ 10

11

11

12

12 ~ 13

13 ~ 16

17

18 ~ 19

Polygroup

®

 Trading Limited (hereinafter “Polygroup

®

”) makes products at the best quality we are able to offer. All Polygroup

®

 products 

have been inspected against defects in materials and workmanship prior to leaving factory. Polygroup

®

 is happy to offer warranty for the 

repair or replacement of pool products for 180 days from the date of purchase.  The provisions of this Limited Warranty only apply to the 

original purchaser. Please keep your original store sales receipt, as this proof of purchase will be required and must accompany warranty 

claims to Polygroup

®

 or its designated agents. This Limited Warranty does not apply without proof of purchase; or should the purchaser 

modify or repair the product themselves or by unauthorized people; use non-Polygroup

®

 parts or accessories with the product; use the 

product in contravention of the manufacturer’s instructions; use improper voltage; abuse the product in any way; or through accident or 

negligence. This Limited Warranty will not cover consequential damages, including claims for loss of water, pool chemicals, damage, or 

labor, normal wear-and-tear; nor acts of God outside the control of Polygroup

®

. Non-manufacturing defects, such as grasses that may 

grow through the ground cloth and/or pool liner are examples of which Polygoup

®

 cannot be held responsible for.

IN NO EVENT SHALL Polygroup

®

, ITS AUTHORIZED AGENTS, RELATED ENTITIES, OR EMPLOYEES BE LIABLE TO THE BUYER 

OR ANY OTHER PARTY FOR DIRECT OR CONSEQUENTIAL DAMAGES. Some states or countries, or other jurisdictions, do not allow 

the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
This Limited Warranty is not extended to close-outs, factory seconds, or resold products (i.e. garage sales, online auctions, or online 

retailers unaffiliated with Lark Outdoors or Polygroup

®

). Any issues with items purchased from these types of vendors / sellers will need to 

be addressed through these stores. Items purchased from seasonal stores will be treated with an “All Sales Final” Policy instead. 

Limited Warranty

Summary of Contents for SKIMMERPLUS SFX1000




















Reviews: