Getting to know the device
Switching modes
1. Press the “POWER” button to turn on the device
2. Press the “REC” button to start the recording .
3. Press “OK” button again to pause the recording and save files automatically.
4. Press “MODE” button to select one of the modes available: photo, audio recording, playback, and video recording.
5. Press the “POWER” button and hold it for 3 second to shut down the device.
Video record
After the car DVR completes power-on procedure, it will enter the video record mode and there will be a video
symbol on the left upper corner, indicating the device has entered the standby state.
Press the REC key to start; during videoing process, if the device is not controlled manually, it will save one video file
every 2min automatically; when the card is full of video files, the first video file will be deleted automatically and the
device will continue working. This is the cyclic video record function of this device.
Cyclic Video record while Charging
After the card DVR is connected with the charger and powers on automatically, it will enter the video record mode
and automatically start videoing and have one video file every 2/3/5 minutes. When the card is full of video files, the
first video file will be deleted automatically and the device will continue working, achieving the function of cyclic
video record. To stop, press the REC key.
NOTE:
1. If this device is connected to PC and charger but it cannot have the function of video record while charging, lease power it off
and reconnect with the charger.
2. Whether with car charger or common charger, you may have the function of videoing while charging.
3. If you charge the device with car charger, after the car is powered on, the device will be charged and start to take video
automatically; after the car stops, it will save files and power off after 5s automatically.
5