LAPPSET Yalp Sona YA 3500, Installation Instructions Manual

Page: 34 / 44

34
YA3500-201006
EN
NL
EN
Quick drying concrete (C20/
C25 NEN -EN206-1/-8005)
800 kg 1764 lbs
Surface mount
Drill + bit Advised for anchors
Chemical anchor (4000N) e.g.
Hilti HIT 170 with 8.8 anchor
M20 (in combination with C20/
C25 concrete)
- -
A. PREPARATION
A.1 TRANSPORTATION ADVICE
WARNING Not taking the right precautions
could result in accidents and/or damage.
WARNING When using heavy equipment
follow the safety instructions provided by the
manufacturer.
CAUTION The person(s) transporting the product
should wear the required protection and clothing.
• Before transporting check the box and pallet
for any damage or loose parts
• When using (heavy) equipment make sure the
person is certifi ed when required to use the
equipment
• Always transport the product upright
• Always use the supplied pallet and transport
materials
• Extra equipment may be necessary to safely
transport the product
• Make sure the used equipment can handle the
weight and size of transporting the product
• Transport the product as close as possible
to the eventual place of installation before
unpacking the product
A.2 Dimensions of the installed Sona
A.3 Overview of products
CAUTION The person unpacking the product
should wear the required protection and clothing.
CAUTION Do not unpack the product before
transporting it to the eventual place of installation
to prevent damages.
• Use a forklift to load and unload the pallets
• Use a Torx (T25) screwdriver (not included) to
open the wooden crate
• Unpack the product in a dry environment
• While unpacking the product check the product
for any damages or missing parts
• Check cables for any damages
• Please recycle and discard the packaging
material correctly
A.4 Make sure there is at least 1,5 meters (5ft)
distance between the Sona and surrounding
objects.
A.5 Avoid placing the Sona close to trees or other
high moving objects. Moving shadows will disturb
the working of the camera and will result in a sub-
optimal working of the product.
A.6 Make sure the power cable is located at the
bottom of the arch, at the side where the button is
desired. The cable should have an overlength of 2
meters (6.6ft). *Use local standards to determine
how deep electrical wires need to be buried.
WARNING Make sure the main power to the
power cable is switched off before starting the
installation.
A.7 Make sure the main power to the power cable is
switched off before starting the installation.
A.7 Avoid contact with hot materials (or close
proximity to glass structures) to prevent shrinkage
of the grass fi bres.
A.8 Make sure a recess will be created with the
right dimensions, at the right location with respect
to the power cable.
A.9 If needed, prepare the ground:
• Make sure the surface is level in all directions
• Determine ground level (0 level), which is the
reference point for all other dimensions