Lapple FIBRO FIBROTOR VM.NC, Assembly And Operation Manual

Page: 34 / 50

9 REPAIR
9.2 MAINTENANCE WORK
FIBROTOR
34 | 50
9.2
Maintenance work
The following activities are considered maintenance work:
•
Inspection
•
Maintenance / cleaning
•
Repair
9.2.1
Inspections
Daily before the start of the work shift:
•
Inspection of the essential functional units.
•
Inspection of the air pressure on the manometer.
•
Inspection of the filter bowl for the accumulated condensate.
9.2.2
Maintenance / cleaning
Turn off the machine in a secure manner
Performing maintenance and cleaning work when the power supply is turned on is
dangerous. Perform the 5 steps to securely turn off the electric power supply. All
other power supply sources must be also turned off. Injuries when the power
supply is turned on.
5 steps for securely turning off the electric power supply.
•
Turn off the main switch (disconnect all sides)
•
Secure the main switch against re-starting
•
Check for absence of voltage
•
Ensure the grounding of all sides
•
Cover any live neighbouring parts
After the work has been completed, the shut-down must be in cancelled in the
reverse order.
When maintaining the rotary table, the following must be ensured:
•
all work steps are performed in the specified order.
After the maintenance work has been completed, it must be checked whether
•
the work has been performed completely.
•
all foreign bodies have been removed from the work area.
•
the safety devices have been mounted properly and are functioning.
The operator must establish the cleaning intervals.