OPERATION
WARNING
Damaged cable assemblies/charging cable - danger
to life due to electric shock!
Handling a damaged lead set/charging cable can result
in death or serious injury.
• Check the charging cable for damage before each
use. Replace damaged lead sets/charging cables with
a new one.
• Do not use adapters or extensions in connection with
the cable assemblies /charging cable.
Start charging process
When the cable assemblies/charging cable is connect-
ed to the charging station and the electric vehicle, the
charging process can be started.
Please also refer to the operating instructions for your
electric and hybrid vehicle and for your charging station.
End loading process
After using the cable assemblies/charging cable, replace
the protective cap fitted at the factory. Wind up the cable
set/charging cable without bending it and stow it in the
designated place in the vehicle. Temporarily storing the
Mode3 2.0 charging cable in the luggage compartment
is unproblematic up to a temperature of 65 °C.
CLEANING
WARNING
Only clean the charging cable when it is unplugged!
WARNING
Touching live components - danger to life from
electric shock!
Touching live components can lead to death or serious
injury.
• Only clean the cable assemblies/charging cable when
it is unplugged-
• Make sure that no water can get to contact parts.
ATTENTION
Material damage due to incorrect cleaning
Incorrect cleaning can lead to material damage to the
cable set/charging cable.
• Make sure that no water can get to contact parts.
• Do not use compressed air or high-pressure cleaners.
• Wipe the cable set/charging cable with a dry cloth
only, without adding any cleaning agents.
Dry cleaning
Use only a dry cloth for cleaning, wipe the lead set/
charging cable with it.
DISPOSAL
The cable assemblies/charging cable must not
be disposed of with normal household waste.
Use a collection point for recycling old electrical
and electronic equipment. For this purpose, contact your
dealer or directly your responsible waste disposal
company.
