LAPLACE INSTRUMENTS LTD
RF300
USER GUIDE
Page 3
Introduction
The RF300 large loop antenna has been developed to meet the requirements of
EN55015, section 9.9.1, which refers to CISPR16-1-4, section 4.6.1. This specifies the
limits for magnetic field induced current for luminaires with lamp operating
frequencies in excess of 100Hz.
Construction of the RF300 is as detailed in annex C of EN55016. This antenna is fully
compliant with the standard and details of the calibration factors are included in this
manual. These antenna factors should be added to the results to obtain correct
measurements that can be compared directly with the limits.
Test setup and limits should be conducted as required by EN55015, section 4.4.
Packing List
On receipt of the RF300, check the contents of the packages against the diagram shown
in fig 1.
Identify each component and check for shortages.
See also list overleaf.
Qty 4 Corner posts
Qty 3 loops
Qty 4 Base extensions
Qty 3 Loop
transducers
Switch unit
with cable
Central pillar
Qty 4 Post stabilisers
Qty 8 long +
8 short wood
screws
Qty 5
tiewraps
10dB
attenuator
Qty 1 5m
cable
Qty 3
loop
leads
Qty 4 Corner posts
Qty 3 loops
Qty 4 Base extensions
Qty 3 Loop
transducers
Switch unit
with cable
Central pillar
Central pillar
Qty 4 Post stabilisers
Qty 8 long +
8 short wood
screws
Qty 5
tiewraps
10dB
attenuator
Qty 1 5m
cable
Qty 3
loop
leads
