LAPIS Semiconductor ML62Q1347, User Manual

Page: 12 / 14

ML62Q1347 Reference Board User’s Manual
FEBL62Q1347RB 8
5.2. ML62Q1347 Reference Board BOM
Table 3
Reference Board BOM
Parts Number Silk Contents Package Type Qty. Maker
1 QTU-11837 RB-D62Q1347GD24 PWB - 1 LAPIS
2 GMK107BJ105KA C1,C2 Ceramic
Capacitor
1uF/35V 1608(1.6x0.8mm) 2 TAIYO
YUDEN
3 HIF3FC-14PA-2.54DSA(71) CNE 14pin Header
Connector 14PIN DIP 1 HIROSE
4 A2-3PA-2.54DSA J1, J2, PWR 3pin Header
Connector 3PIN DIP 3 HIROSE
5 MCR03ERTJ000 J3,J4,J5
Resistor 0Ω
1608(1.6x0.8mm) 3 ROHM
6 SML-H12P8T P20, P21, P22 LED Green 2012(2.0x1.2mm) 3 ROHM
7 MCR03EZPJ271 R1, R2, R3
Resistor 270Ω
1608(1.6x0.8mm) 3 ROHM
8 MCR01MZPJ103 R4
Resistor 10kΩ
1005(1.0x0.5mm) 1 ROHM
9 ML62Q1347-xxxGD U1 16-bit
Microcontroller WQFN24 1 LAPIS
11 HIF3GA-2.54SP - Short pin - 3 HIROSE
12 FF013-P3555-AR791 - Rubber leg, Push
rivet - 4 KOYO
FASTENER
13 - CN1, CN2 Unmounted 50PIN DIP 2 -
14 - VDD, VSS, UVDD Unmounted
φ0.8mm
3
[Note]
-
The diameter of through hole of CN1 and CN2 is 0.8 mm.
Using CN1 and CN2, the diameter of connector pin should use the connector below 0.8mm, such as 0.5mm.
-
The parts may be changed into another parts with equivalent part special quality.
5.3. ML62Q1347 Reference Board Schematic
The next page shows the schematic of ML62Q1347 Reference Board