LAPIS Semiconductor EASE1000, User Manual, Page: 22 / 34

EASE1000 User’s Manual
Chapter 3 START
3 START
3.1 Starting EASE1000
This section describes how to start EASE1000.
For the following software running on the host PC, see the appropriate user's manual.
- DTU8 User's Manual
- MWU16 Flash Multi Writer Host Program User's Manual
3.1.1 Starting Procedure
Start EASE1000 according to the following procedure.
(1) Connect EASE1000 with the target system through the supplied EASE1000 interface cable.
(2) Connect EASE1000 with the host PC though the supplied USB cable.
EASE1000 is USB bus-powered. When the USB cable is connected to EASE1000, EASE1000 is turned on, and
the POWER indicator on EASE1000 lights up in green.
(3) Turn on the target system.
(4) Start the software on the host PC.
Target system
Host PC
Target LSI
EASE1000 interface cable
USB cable
EASE1000
・
DTU8 Debugger
・
MWU16 Flash Multi Writer
host program
Figure 3-1 EASE1000 System Diagram
Note
Be sure to start according to the starting procedure.
Failing to obey the procedure may damage EASE 1000 or the target system, or cause an
electric shock or fire.
Note
Be sure to use the cables attached to EASE 1000.
Using different cables may damage EASE 1000 or the target system, or cause an electric shock
or fire.
FEXTEASE1000-02 1