Guarantee
Congratulations on your purchase of a quality LAP product. We are confident in the quality of this product, but for your
peace of mind it comes with a 3 year guarantee. If your product develops a fault within the guarantee period, please
contact the retailer where the item was purchased, with your proof of purchase, where the product will be replaced or refunded.
This guarantee specifically excludes:
• Fair wear and tear
• Misuse or abuse
• Lack of routine maintenance (see care instructions)
• Failure of fixings
• Accidental damage
• Cosmetic damage
• Failure to follow the manufacturer’s fitting/ care and maintenance instructions
This guarantee is limited to the purchase price of the product and the manufacturer’s liability does not extend to any costs
damages or losses whatsoever in excess of that amount. Proof of purchase is required. This guarantee does not affect your
statutory rights.
Safety
All fittings must be installed by a competent person in accordance
with local regulations (IET wiring regulation BS7671).
Check the pack and make sure you have all of the parts listed.
Remove all packaging, wrap etc. from the product.
Decide on the appropriate location for your product.
CAUTION: IP44 is guaranteed when the product is properly
installed and sealed.
Always avoid the product to be located at corrosive environment.
Always refer to the installation drawing for the orientation of the
product.
using the screws and wall plugs supplied. The screws and wall
supplied and must be purchased.
Take care not to drill into any pipes or mains cables beneath the
surface during mounting holes preparation.
Never put anything on the product or hang anything on any part
of this product.
Never use the terminal cables to bear the product weight.
When the product does not light after installation:
> Ensure there is no electricity failure
> Ensure all the connections are secured
If you have any doubt about installation / use of this product,
Always disconnect the product from mains at least 10 minutes
allowing to cool down before any maintenance or adjustment.
It is recommended to have a regular schedule of care and
maintenance to keep the surface condition well.
Technical Data
Supply Voltage:
220-240 V~, 50 Hz
Bulb Type:
2 x Max 5 W GU10. (check bulb dimensions
in relation to space available)
Conformity with all relevant EC Directive
requirements.
Class I product, must be connected to earth
Minimum distance from lighted objects (0.5
Do not use this product without the glass
shield being in place. If the glass shield is
cracked or damaged, it must be replaced
using only heat resistant tempered glass.
metres)
0,5
IP44
Splash-proof
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
Local Authority or local store for recycling
advice.
xxWyy
xx-year; yy-week of the year
Kingfisher International Products Limited
3 Sheldon Square London W2 6PX,United Kingdom
Kingfisher International Products B.V.
Rapenburgerstraat 175E, 1011 VM Amsterdam,
The Netherlands
Guarantee
Congratulations on your purchase of a quality LAP product. We are confident in the quality of this product, but for your
peace of mind it comes with a 3 year guarantee. If your product develops a fault within the guarantee period, please
contact the retailer where the item was purchased, with your proof of purchase, where the product will be replaced or refunded.
This guarantee specifically excludes:
• Fair wear and tear
• Misuse or abuse
• Lack of routine maintenance (see care instructions)
• Failure of fixings
• Accidental damage
• Cosmetic damage
• Failure to follow the manufacturer’s fitting/ care and maintenance instructions
This guarantee is limited to the purchase price of the product and the manufacturer’s liability does not extend to any costs
damages or losses whatsoever in excess of that amount. Proof of purchase is required. This guarantee does not affect your
statutory rights.
Safety
All fittings must be installed by a competent person in accordance
with local regulations (IET wiring regulation BS7671).
Check the pack and make sure you have all of the parts listed.
Remove all packaging, wrap etc. from the product.
Decide on the appropriate location for your product.
CAUTION: IP44 is guaranteed when the product is properly
installed and sealed.
Always avoid the product to be located at corrosive environment.
Always refer to the installation drawing for the orientation of the
product.
using the screws and wall plugs supplied. The screws and wall
supplied and must be purchased.
Take care not to drill into any pipes or mains cables beneath the
surface during mounting holes preparation.
Never put anything on the product or hang anything on any part
of this product.
Never use the terminal cables to bear the product weight.
When the product does not light after installation:
> Ensure there is no electricity failure
> Ensure all the connections are secured
If you have any doubt about installation / use of this product,
Always disconnect the product from mains at least 10 minutes
allowing to cool down before any maintenance or adjustment.
It is recommended to have a regular schedule of care and
maintenance to keep the surface condition well.
Technical Data
Supply Voltage:
220-240 V~, 50 Hz
Bulb Type:
2 x Max 5 W GU10. (check bulb dimensions
in relation to space available)
Conformity with all relevant EC Directive
requirements.
Class I product, must be connected to earth
Minimum distance from lighted objects (0.5
Do not use this product without the glass
shield being in place. If the glass shield is
cracked or damaged, it must be replaced
using only heat resistant tempered glass.
metres)
0,5
IP44
Splash-proof
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
Local Authority or local store for recycling
advice.
xxWyy
xx-year; yy-week of the year
Kingfisher International Products Limited
3 Sheldon Square London W2 6PX,United Kingdom
Kingfisher International Products B.V.
Rapenburgerstraat 175E, 1011 VM Amsterdam,
The Netherlands
Guarantee
Congratulations on your purchase of a quality LAP product. We are confident in the quality of this product, but for your
peace of mind it comes with a 3 year guarantee. If your product develops a fault within the guarantee period, please
contact the retailer where the item was purchased, with your proof of purchase, where the product will be replaced or refunded.
This guarantee specifically excludes:
• Fair wear and tear
• Misuse or abuse
• Lack of routine maintenance (see care instructions)
• Failure of fixings
• Accidental damage
• Cosmetic damage
• Failure to follow the manufacturer’s fitting/ care and maintenance instructions
This guarantee is limited to the purchase price of the product and the manufacturer’s liability does not extend to any costs
damages or losses whatsoever in excess of that amount. Proof of purchase is required. This guarantee does not affect your
statutory rights.
Safety
All fittings must be installed by a competent person in accordance
with local regulations (IET wiring regulation BS7671).
Check the pack and make sure you have all of the parts listed.
Remove all packaging, wrap etc. from the product.
Decide on the appropriate location for your product.
CAUTION: IP44 is guaranteed when the product is properly
installed and sealed.
Always avoid the product to be located at corrosive environment.
Always refer to the installation drawing for the orientation of the
product.
using the screws and wall plugs supplied. The screws and wall
supplied and must be purchased.
Take care not to drill into any pipes or mains cables beneath the
surface during mounting holes preparation.
Never put anything on the product or hang anything on any part
of this product.
Never use the terminal cables to bear the product weight.
When the product does not light after installation:
> Ensure there is no electricity failure
> Ensure all the connections are secured
If you have any doubt about installation / use of this product,
Always disconnect the product from mains at least 10 minutes
allowing to cool down before any maintenance or adjustment.
It is recommended to have a regular schedule of care and
maintenance to keep the surface condition well.
Technical Data
Supply Voltage:
220-240 V~, 50 Hz
Bulb Type:
2 x Max 5 W GU10. (check bulb dimensions
in relation to space available)
Conformity with all relevant EC Directive
requirements.
Class I product, must be connected to earth
Minimum distance from lighted objects (0.5
Do not use this product without the glass
shield being in place. If the glass shield is
cracked or damaged, it must be replaced
using only heat resistant tempered glass.
metres)
0,5
IP44
Splash-proof
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
Local Authority or local store for recycling
advice.
xxWyy
xx-year; yy-week of the year
Kingfisher International Products Limited
3 Sheldon Square London W2 6PX,United Kingdom
Kingfisher International Products B.V.
Rapenburgerstraat 175E, 1011 VM Amsterdam,
The Netherlands
Manufacturer • Fabricant • Producent:
UK Manufacturer:
Kingfisher International Products Limited,
3 Sheldon Square, London, W2 6PX,
United Kingdom
EU Manufacturer:
Kingfisher International Products B.V.
Rapenburgerstraat 175E, 1011 VM Amsterdam,
The Netherlands
www.kingfisher.com/products
EN
www.diy.com
www.screwfix.com
www.screwfix.ie
To view instruction manuals online,
visit www.kingfisher.com/products
