owner’s manual
operation
Control/Connector
Function
13
parametric equalizer
These switches determine the frequencies the gain
knobs on the front panel will affect. Setting a switch
on one of the 5 bands on top of the equalizer permits
the corresponding control on the front panel to raise
or lower the gain at that frequency.
EQ Frequency Controls
Allows you to adjust the left and right channel
input sensitivity to match the output level from
your line or auxiliary source.
Input Gain Adjustments
Subwoofer Gain Control
Turning this control clockwise increases the
subwoofer channel level.
V
olume and Fader Control
The Volume adjusts the total output level. Fader
adjusts the output balance between the front and
rear amplifiers.
Power Indicator LED
This indicator lights up when the unit is properly
powered, grounded, and the remote power lead
has power to it.
Defeat Switch
When the “DEF” switch is in the on position the
equalizer functions are bypassed. Depressing the
“DEF” switch again will restore the equalizer’s
operation.
Power Connections
(+12V, Remote, Ground)
1. Connect the red wire to the car battery or
other power source.
2. Connect the orange wire to the power antenna
activating wire of the car stereo.
3. Connect the black wire to the car’s chassis for
the proper ground connection.
Line and Auxiliary Inputs
RCA cables are used to connect your car stereo
head unit, CD player, or other source to either
the line or aux inputs.
Subwoofer Frequency
Control
By rotating this selector you can choose any
crossover frequency from 40Hz to 400Hz. Turning
the control clockwise permits more upper bass
to travel through the sub channel.
Front, Rear &
Subwoofer Outputs
RCA cables are used to connect the front channel
outputs to the front channel amplifier inputs, the
rear channel outputs to the rear channel amplifier
inputs, and the sub outputs to the subwoofer
amplifier inputs.
1
2
5
7
6
8
9
10
11
12
13
This switch selects the aux or line inputs.
Aux Input Switch
3
Parametric EQ Controls
Turning the controls clockwise increases the level
of the sound at the frequency that you have set on
the EQ’s top panel. Counter-clockwise reduces the
level at that frequency. Choose the settings which
best match your system and your prefered audio
response.
4
