www.Lanzar.com
3
Features and Specifications
Crossover Mode Selector:
When used with neutral, full range system, set this switch to "
FULL
". lf you wish to use the
internal crossover to power a driver or specific frequency range, use the "
LPF
" or "
HPF
' for the "
L0WPASS
" or "
HIGH-
PASS
" settings.
Input Level Controls:
Enables the matching of input levels to the output levels from head unit (or other signal source).
The input sensitivity of adjustment ranges from 6V to 200mV.
Crossover Frequency Control:
When crossover mode selector is in
HIGHPASS
mode, this cantrol sets the lower
frequency limit for audio program sent to the speakers. When crossover mode selector is in
LOWPASS
mode, this
control sets the upper frequency limit for audio program sent to the speakers. The crossover is continously variable
adjustment from 40 to 250Hz.
Bass Boost Selector:
This selector switch permits the bass level an increase of 18dB.
Low Level Input:
This amp features RCA type jacks for high impedance input. Use these with car stereo input which
uses RCA type connector cables.
High Level Input:
If your car stereo jacks are not RCA type output, use the high-low level input adaptor to connect the
speaker output leads of car stereo and the RCA input jacks of amp.
AUX Line Outputs:
This amp features RCA jacks for AUX line outputs. Use these for unlimited system expansion to the
next amplifier.
