11)MODE BUTTON (MODE)
Press this button to select Radio, Tape, CDP(MP3) or CDC/Aux In modes.
The available selections depends on version:
Radio Cassette Player:
Radio > Tape > CDC/Aux In(Optional)
Radio CD/MP3 Player
Radio > CDP > CDC/Aux In(Optional)
The RESET button is located on the main unit (as shown on the diagram). To press it vertically with a
ballpoint pen or metal object will activate it. The reset button is to be activated for the following reasons:
Initial installation of the unit when all wiring is completed.
All the function buttons do not operate.
Error symbol on the display.
RESET BUTTON
Note:
If press RESET button, the unit still cannot function normally, please use a cotton swab
soaked in isopropyl alcohol to clean the socket on the back of the control panel.
6. AUDIO OPERATIONS
12)VOLUME UP/DOWN BUTTON
7) FUNCTION SELECT BUTTON
Press this button to select desired audio function.
While the selected function is displayed, turn Volume Knob to adjust the level within 5 seconds,
otherwise the unit will return to volume adjustment mode.
2) MUTE BUTTON (MUTE)
Press this button to mute the sound. Press it again to resume listening.
3) PRESET EQUALIZER BUTTON (PEQ)
Press this button to toggle the following EQ setting:
FLAT->CLASSICS->POP M->ROCK M->DSP OFF
At DSP OFF mode, EQ will be controlled by Bass/Treble setting.
15)BAND/LOUDNESS BUTTON (BND/LD)
Press the Band/Loudness Button long to switch the loudness on or off. When Loudness is on, display
will show 'Loud On' for a few seconds.
ORDER OF FUNCTION:
VOLUME(VOL) -> BASS(BAS) -> TREBLE(TRE) ->BALANCE(BAL) ->FADER(FAD)
Press these buttons alone to adjust sound level, use this button with Function Select Button to
adjust the level of Volume, Bass, Treble, Balance or Fader.
RE
SE
T
7. RADIO OPERATIONS
5) LOCAL/DISTANT BUTTON (LOC) - Optional
During station tuning, this button allows you prior to access strong local station only (Local
mode), or to access a wider range of using distant mode (DX). When power up DX mode will be
selected automatically; Press LOC button briefly to select Local mode and “LOCAL” symbol on
the VFD will light up for a few seconds.
4) MONO BUTTON (MONO)
When you receive a station,“ST” on the display will on. Press this button to enter Mono
Mode.
E - 8
