7
• RESET
Reset button (19) is placed on the panel and must be activated with either a ball
point pen or thin metal object. The reset button is to be activated for the following
reasons:
- Initial installation of the unit when all wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
RADIO OPERATION
• BAND SELECTION
At tuner mode, press
LOU/BND
button (13) to select the desired band.
The reception band will change in the following order:
• STATION SELECTION
Press
TUNE/SKIP/TRACK
button (16) or
TUNE/SKIP/TRACK
button (17)
shortly to activate automatic seek function. Press for several seconds until
“
MANUAL
” appeared on the display, the manual tuning mode is selected. If both
buttons have not pressed for several seconds, they will return to seek tuning mode
and “
AUTO
” appeared on the display.
• LOCAL/DISTANCE
Press
LOC
button (2) shortly to select between local and distant staitons. Local
setting for reception of strong station and distant setting for reception of weaker
stations. This function is effect during AUTO SEEK operation.
• AUTOMATICALLY MEMORY STORING & PROGRAM SCANNING
- Automatic Memory Storing
Press
AMS
button (18) for several seconds, the radio searches from the current
frequency and checks the signal strength until one cycle search is finished. And
then 6 strongest stations are stored into the corresponding preset number button.
- Program Scanning
Press
AMS
button (18) shortly to scan preset station. When the field strength
level is more than the threshold level of stop level. The radio is holding at that
preset number for several seconds with releasing mute, then searches again.
• STATION STORING
Press any one of the preset buttons (14) (1 to 6) to select a station which had been
stored in the memory. Press this button for several seconds (until 2’nd beeps come
out), current station is stored into the number button.
FM1
FM2
FM3
AM
