Lanzar VBD 1500MP, Owner'S Manual

Page: 9 / 16

9
RADIO OPERATION
• BAND SELECTION
At tuner mode, press LOU/BND button
(13) to select the desired band.
The reception band will change in the
following order:
• STATION SELECTION
Press TUNE/SKIP/TRACK button
(16) or TUNE/SKIP/TRACK button
(17) shortly to activate automatic seek
function. Press for several seconds
until
“MANUAL” appeared on the
display, the manual tuning mode is
selected. If both buttons have not
pressed for several seconds, they will
retune to seek tuning mode and
“AUTO” appeared on the display.
• LOCAL/DISTANCE
Press LOC button (2) shortly to select
between local and distant stations.
Local setting for reception of strong
station, and a distant setting for
reception of weaker stations.
This function is in effect during AUTO
SEEK operation.
• MONO/STEREO
Press MON button (3) to select
monaural or stereo (Mono reception
for radio stations). You can sometimes
improve reception of distant stations
by selecting mono operation.
• AUTOMATICALLY MEMORY
STORING & PROGRAM SCANNING
- Automatically Memory Storing
Press AMS button (18) for several
seconds, the radio searches from
the current frequency and checks
the signal strength until one cycle
search is finished. And then 6
strongest stations are stored into the
corresponding preset number
button.
- Program Scanning
Press AMS button (18) shortly to
scan preset station. When the field
strength level is more than the
threshold level of stop level.
The radio is holding at that preset
number for several seconds with
releasing mute, then searches again.
• STATION STORING
Press any one of the preset buttons
(14) (M1 to M6) to select a station
which had been stored in the memory.
Press this button for several seconds,
current station is stored into the
number button.
OPERATION
FM1 FM2 FM3 AM