background image

 - 1 -

INTRODUCTION...

FEATURES

Congratulations on purchasing the 

LANZAR OptiX-9.

 You are now the proud owner of

the finest and most accurate bass enhancing & restoration system available.

Before you start to install this audio product to your music system, please take a few
minutes to sit back and read through this manual. It contains lots of useful facts and
information.

There's a dash mounted level control unit which permits instant adjustments; whether
it's because your passenger is not as much a "bass-head" as you are or for whatever
reason you want to turn it down a bit, this handy knob does the trick.

Whether your interest is in Beethoven's kettle drums, in Miles Davis' trumpet or in the
percussion of Rap lyrics, the 

OptiX-9 

would restore those long lost missing bass

notes, with amazing accuracy and clarity.

Bass Driver:

 The 

OptiX-9

 contains a Bass Driver circuit that accurately recreates

and injects Low frequency information back into the signal path. What that means in

everyday terms is that the 

OptiX-9

 will give more bass impact to your best compact

discs or even your old tapes.

Bass Equalization Circuit: The OptiX-9 

has a unique equalization circuit that contours

the restored bass to your speaker systems.

Dash Mount Control:

 The 

OptiX-9

 comes with a dash mountable control that allows you

to enjoy the effects of the 

OptiX-9

 without having to leave the drivers seat. The dash

mount control has a LED indicator, this LED will grow brighter as you add more bass or

dimmer when you decrease it.

Bass Maximizer Indicator: 

Not only does The 

OptiX-9 

provide good music to your ears,

but it also gives you some visual enjoyment as well. On the Chassis of the 

OptiX-9

, there

are two LED indicators that flashes when the bass maximization circuit is activated.

PFM Subsonic Filter Control:

 This unique feature is legendary with its ability to fine tune

the bass response of any system. Why waste power on nasty subsonic information when

PFM Subsonic Filter Control can help you to clean things up?

Bass Output Control:

 The 

OptiX-9

 has the ability to produce large amount of deep,

mind shattering bass without damaging your speakers. The Bass Output Control circuit

allows the 

OptiX-9

 to maximize the bass output of any autosound audio system while

restraining destructive bursts.

Summary of Contents for OPTIX-9









Reviews: